Skip to main content

Safety Information

IMPORTANT SAFETY NOTICE

Read all safety information before installing or operating this device. Failure to follow safety guidelines may result in equipment damage or serious personal injury.

Electrical Safety​

  • Disconnect all power sources before installation or maintenance.
  • Use only power supplies within the specified voltage range (+5V to +30V DC).
  • Do not exceed the maximum input voltage of 35V.
  • Ensure correct polarity when connecting power supply.
  • Do not connect the device to AC mains directly.
UPS CAPACITORS

Risk of injury from energy stored in capacitors. Wait at least 5 minutes after shutdown of device before opening the case or handling internal components.

Environmental Considerations​

  • Operate only within the specified temperature range (-25°C to +80°C).
  • Maintain ambient relative humidity between 5% and 95% (non-condensing).
  • Install in a location protected from excessive dust, moisture, and corrosive atmospheres.
  • Ensure adequate ventilation to prevent overheating during high processor loads.

Installation Safety​

  • Installation must be performed by qualified personnel familiar with industrial electrical systems.
  • Follow all applicable local electrical codes and regulations.
  • Use appropriate wire gauges and terminal connections as specified.
  • Secure all cable connections and use appropriate strain relief.